CAPACITY
FEED SIZE
The Rotary Dryer belongs to the drying and heat treatment equipment, suitable for drying magnetic, heavy, and floating concentrates of metal and non-metal ores, clay in the cement industry, and coal slurry in the coal mining industry with certain humidity or particle size. It has the advantages of simple structure, convenient operation, and strong adaptability, and is a widely used drying machinery.
WIDE APPLICABILITY
Strong adaptability to materials, suitable for energy-saving drying of various powder, granular, strip, and block materials. It can not only quickly remove moisture from materials, but also has simple and reliable equipment operation
STRONG DRYING ABILITY
Adopting a new type of multi combination lifting device, it has multiple functions such as guidance, uniform flow, and lifting, which can effectively overcome the "wind tunnel" phenomenon of traditional dryers, allowing materials to fully contact the hot air flow, and the drying heat transfer process is strong and efficient
EXCELLENT MATERIAL SELECTION
The cylinder body is made of steel material, which has high hardness, toughness, and is more wear-resistant; The transmission of large and small gears adopts pin column replaceable gears, with low investment cost. There are multiple lubrication methods for the supporting wheels, effectively extending the service life
LESS DUST LEAKAGE
Good sealing performance, complete dust removal device, effectively reducing dust leakage; Reasonable operating parameters, effective utilization of thermal energy, reduction of coal and electricity consumption, and improvement of production capacity
Using a self combustion device to generate heat, the wet material is fed into one end of the dryer and undergoes sufficient heat exchange with the hot air flow from the combustion chamber under the flipping of the inclined spiral plate. It then moves to the discharge valve at the other end of the dryer to discharge the finished product, thus completing the drying operation.
| Specification (diameter*length) | Cylinder volume (m³) | Production capacity (t/h) | Installation slope (%) | Maximum intake temperature (℃) | Main motor (kw) | Total weight (t) |
|---|---|---|---|---|---|---|
| Φ1.2*8 | 9 | 1.9-2.4 | 3-5 | 700-800 | 7.5 | 9 |
| Φ1.2*10 | 11.3 | 2.4-3.0 | 3-5 | 700-800 | 7.5 | 11 |
| Φ1.5*12 | 21.2 | 4.5-5.7 | 3-5 | 700-800 | 15 | 18.5 |
| Φ1.5*14 | 24.7 | 5.3-6.6 | 3-5 | 700-800 | 15 | 19.7 |
| Φ1.5*15 | 26.5 | 5.7-7.1 | 3-5 | 700-800 | 15 | 20.5 |
| Φ1.8*12 | 30.5 | 6.5-8.1 | 3-5 | 700-800 | 18.5 | 21.5 |
| Φ1.8*14 | 35.6 | 7.6-9.5 | 3-5 | 700-800 | 18.5 | 23 |
| Φ2.2*12 | 45.6 | 9.7-12.2 | 3-5 | 700-800 | 22 | 33.5 |
| Φ2.2*14 | 53.2 | 11.4-14.2 | 3-5 | 700-800 | 22 | 36 |
| Φ2.2*16 | 60.8 | 13.0-16.2 | 3-5 | 700-800 | 22 | 38 |
| Φ2.4*14 | 63.1 | 13.5-16.9 | 3-5 | 700-800 | 37 | 45 |
| Φ2.4*18 | 81.4 | 17.4-21.7 | 3-5 | 700-800 | 37 | 49 |
| Φ2.4*20 | 90.4 | 19.3-24.1 | 3-5 | 700-800 | 45 | 54 |
| Φ2.4*22 | 99.5 | 21.2-26.5 | 3-5 | 700-800 | 45 | 58 |
| Φ2.6*24 | 127.4 | 27.2-34.0 | 3-5 | 700-800 | 55 | 73 |
| Φ3.0*20 | 141.3 | 30.1-37.7 | 3-5 | 700-800 | 75 | 85 |
| Φ3.0*25 | 176.6 | 37.7-47.1 | 3-5 | 700-800 | 75 | 95 |
| Φ3.2*25 | 201 | 42.9-53.6 | 3-5 | 700-800 | 90 | 110 |
| Φ3.6*28 | 285 | 60.8-76.0 | 3-5 | 700-800 | 160 | 135 |
